01 / Scale
Compare the complete dimensions with your furniture, ceiling height and available clearance.
Monty Alabaster Pendant Light
1 Head: ∅ 3.9″ x H 9.8″ / Brass & White Alabaster
$224.10
Skip to product information
In stock
Monty Alabaster Pendant Light
AL-ALB-MON-001
$224.10
Duties included.
Shipping calculated at checkout.
Payment options at checkout
Make a considered choice
Monty Alabaster Pendant Light
Natural Stone, Suspended in a Softer Light
A slender white alabaster shade hangs from a braided suspension cord, pairing the natural translucency of stone with a restrained metal detail. The Monty Alabaster Pendant Light brings a softly layered focal point to kitchen islands, bedside settings and entryways, with brass or black hardware to coordinate with the room.
Choose from 1-, 2-, 3- or 5-light configurations. Both finishes retain the same white alabaster shade, while the hardware provides either a warm brass accent or a sharper black outline. The multi-light versions bring the individual pendants together on a round canopy.
Alabaster Pendant Light1 / 2 / 3 / 5 HeadsBrass or BlackReplaceable BulbE12 / E14Hardwired
01 / DIMENSIONSProduct Size
1 Head
∅ 3.9″ x H 9.8″
Shade dimensions; the listed suspension cable is approximately 59 inches.
2 Heads
Round Canopy ∅ 7.9″ x H 59.1″
Round canopy; the listed height describes the selected hanging configuration.
3 Heads
Round Canopy ∅ 7.9″ x H 59.1″
Round canopy; arrange the three shades at heights suited to the installation.
5 Heads
Round Canopy ∅ 11.8″ x H 78.7″
Round canopy; confirm the complete 78.7-inch listed drop against ceiling height.
Choose proportion before head count
Choose a single pendant for a compact bedside or counter accent, two or three lights for a balanced cluster, or the five-light version for a larger focal point. Measure the canopy, the furniture beneath it and the finished drop. Head count does not replace a room-specific lighting plan.
Dimensions are approximate. Confirm the complete installed drop and the ceiling fixing before ordering. The selected variant names show inches only.
02 / SPECIFICATIONSProduct Details
MaterialsBrass hardware and natural alabaster stone
Head counts1, 2, 3 or 5
Finish optionsBrass & White Alabaster; Black & White Alabaster
Bulb socketE12 or E14 according to the supplied electrical version; not E26/E27
BulbsOne per head; not included
Bulb light colorDetermined by the compatible bulb selected.
VoltageAC 110–240V as listed; confirm the supplied version for the destination
MountingHardwired ceiling pendant
Protection / environmentIP20; indoor dry locations only; not waterproof
SuspensionBraided cord; confirm the selected configuration and finished drop
03 / DESIGN & MATERIALSAlabaster, Grain and Translucency
Alabaster has a naturally varied mineral structure. Veins, cloudy markings and differences in translucency are part of the stone, so each shade will look different when unlit and illuminated. The slim cylindrical form keeps the material visible without making the composition feel heavy.
The braided cord adds a tactile detail above the elongated shade. Pair the stone with warm wood, limewash finishes, linen or restrained metal accents for a cohesive mid-century modern or contemporary interior.
04 / FINISH OPTIONSBrass or Black
Brass & White Alabaster
A warm metallic accent that pairs with oak, walnut tones and creamy natural materials. The white stone remains the main visual feature.
Black & White Alabaster
A clear, contrasting outline for contemporary rooms, dark cabinetry or black hardware. The same natural variation is visible in the alabaster shade.
05 / LIGHT QUALITYBulb Selection and Light Quality
This fixture uses replaceable bulbs. The fixture uses one E12 or E14 small Edison screw bulb per head, depending on the supplied socket version; bulbs are not included. Select compatible warm-white LED bulbs, typically 2700–3000K, and confirm the socket and maximum rating on the fixture label. Standard E26 or E27 bulbs will not fit.
Dimming depends on the compatible bulb and control selected. Check the socket, permitted wattage and electrical compatibility; a dimmer is not included unless expressly stated.
06 / INSTALLATION & CAREInstallation and Maintenance
Hardwired ceiling installation requires a qualified electrician. Confirm the local electrical supply, the supplied socket version, junction-box compatibility and load-bearing ceiling support before installation. Multi-light clusters weigh more than a single pendant, so the fixing must be suitable for the chosen configuration.
Switch off and disconnect power before cleaning. Support each stone shade carefully and dust with a soft, dry cloth. Avoid acidic cleaners, abrasive products, soaking and excessive force on the stone or suspension cord.
07 / ROOM STYLINGWhere to Use
Kitchen Island
Use a single pendant or a small round cluster over a defined counter area. Check sightlines and keep the shade and suspension clear of steam and direct water exposure.
Bedside
A single alabaster pendant can free space on a bedside table. Plan the drop around the mattress and furniture height, with the control accessible from the bed.
Entryway & Dining Room
A three- or five-light cluster can create a focused feature above a console or table. Confirm the ceiling height, load-bearing support and clearance beneath the lowest shade.
08 / RESOURCESDownloads
SpecificationsComing Soon
Installation GuideComing Soon
3D FilesComing Soon
09 / QUESTIONSFrequently Asked Questions
Which head counts are available?
This listing includes 1, 2, 3 and 5 heads. Two-, three- and five-head versions use a round canopy. A four-head configuration is not offered.
What bulbs does the Monty pendant use?
This fixture uses replaceable bulbs. The fixture uses one E12 or E14 small Edison screw bulb per head, depending on the supplied socket version; bulbs are not included. Select compatible warm-white LED bulbs, typically 2700–3000K, and confirm the socket and maximum rating on the fixture label. Standard E26 or E27 bulbs will not fit.
Is this listing available in other light colors or dimming versions?
Dimming depends on the compatible bulb and control selected. Check the socket, permitted wattage and electrical compatibility; a dimmer is not included unless expressly stated.
Will the alabaster pattern match the photographs?
Alabaster has a naturally varied mineral structure. Veins, cloudy markings and differences in translucency are part of the stone, so each shade will look different when unlit and illuminated. The slim cylindrical form keeps the material visible without making the composition feel heavy.
How should I choose the size and hanging height?
Choose a single pendant for a compact bedside or counter accent, two or three lights for a balanced cluster, or the five-light version for a larger focal point. Measure the canopy, the furniture beneath it and the finished drop. Head count does not replace a room-specific lighting plan.
Can it be used outdoors or in a wet bathroom?
No. The listed IP20 configuration is intended for indoor dry locations. Keep the stone shade, socket and electrical components away from water spray, steam and outdoor exposure.
Make a considered choice
The details that make it yours.
Before choosing Monty Alabaster Pendant Light, check the size, selected variant and installation requirements for your space.
02 / Compatibility
Confirm voltage, light source, mounting type and any dimming or moisture requirements.
03 / Delivery
Check the applicable shipping information. Ask us to confirm timing for your destination or custom order.
A little reassurance, in the right place.
Use the product details and our guides together. If a specification is unclear, ask us before placing your order.
Related products
Shop by collection
Akari Paper Lamps
Akari Paper Lamps
For a home or a whole project
A considered choice, with useful support.
Explore the practical details behind a beautiful room. Our guides help you compare scale, understand materials and prepare questions before ordering.
01 / Proportion & placement
Work through room dimensions, furniture scale and ceiling clearance before choosing a fixture.
02 / Material & finish
Compare stone veining, paper texture and finish details. Confirm the material listed on each product.
03 / Project enquiries
Share a product link, room plans and specific requirements. Ask about available options and project files.
Here to help you choose
Good lighting starts with good questions.
Practical guidance for choosing, ordering and living with your light.
How do I choose the right size?
Measure the room, ceiling height and nearby furniture. Compare the full fixture dimensions, including the shade, wall projection or hanging drop. Use our size guide as a starting point, and ask us if you need help comparing options.
Can I request a different size or finish?
Some designs may offer customization. Send the product link and your requirements before ordering. Available options, pricing and production timing depend on the design and must be confirmed individually.
What should I check before installation?
Confirm voltage, light source, dimmer compatibility, mounting requirements and any required moisture rating for your location. Hardwired fixtures should be installed by a qualified professional in accordance with local requirements.
Where can I find delivery and return details?
Read our shipping and returns pages before ordering. Timing and eligibility depend on the product, destination and whether the item is customized. Contact us with your order details before arranging a return.
What if an item arrives damaged?
Keep the packaging and contact us with your order number and clear photographs of the item and packaging. Review the returns and support page for the applicable process before arranging a return.
Will natural materials look exactly like the photographs?
Natural stone can vary in color and veining, and paper textures may differ between pieces. Photographs show the design; check the individual material description and ask about details that matter to your project.